NEC LT150/LT85 user manual Wiring Diagram, VCR, DVD Player or LaserDisc Player

Wiring Diagram

To video, S-video, and audio inputs on the projector.

VCR, DVD Player or LaserDisc Player

AUDIO

RGB Signal cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied cable.

Macintosh

(Desktop type or notebook type)

Document Camera

RGB S-VIDEO VIDEO

PC CONTROL

Optional Component V cable

DVD Player (with component output)

IBM VGA or Compatibles

(Desktop type or notebook type)

NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

NOTE:

*If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power management software.

*If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.

NOTE: If using video, S-video, or audio cables, the cables should be 3 m (9.8 feet) or shorter.

E–21