Miele DA 429-4 EXT, DA 428-4 EXT Appliance dimensions, Connection for air extraction

Page 26

Appliance dimensions

1) Extraction

2) Recirculation

3) Ventilation grille positioned at the top for recirculation

4) and 5):

(5 is not required for recirculation mode rangehoods)

The shaded area represents the wall or ceiling area for the vent cut-out, for fitting the connection socket and on EXT models for feeding the connection cable through to the external motor. For recirculation mode, only a connection socket needs to be fitted.

 

Connection for air extraction

 

￿ 150 mm (recommended), or ￿ 125

 

mm with reducing collar. Please note,

DA 428-4

using 125 mm ducting limits through

put and thus rangehood performance.

 

DA 429-4

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents
En AU, NZ Contents Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Safety with children Correct applicationTechnical safety Page Page Correct use Correct installation AccessoriesGuide to the appliance Touch control for grease filters Cooktop lighting Charcoal filterTouch control for the cooktop lighting Touch control for the charcoal filterAir recirculation Description of the functionsAir extraction An external motorMielehome ConctivityAutomatic switch-off of the Intensive setting To switch the fan onTo select a power level Intensive settingTo switch the fan off Run-on optionSafety cut-out To switch the cooktop lighting onTo switch the cooktop lighting off To dim the cooktop lightingReading the operating hours counter for the grease filters Altering the operating hours counter for the grease filtersOperation Reading the operating hours counter for the charcoal filter Important for appliances with stainless steel housing Cleaning and careHousing General notesGrease filters ControlsCleaning the grease filters by hand Cleaning the grease filters in the dishwasherFitting and replacing the charcoal filter Changing a halogen lamp After sales service WarrantyAppliance dimensions Connection for air extractionSafety distance S Installation Assembly partsProtective sheets Conversion kit for recirculation modeLever for dismantling the tower Installation instructions Non-return flapDismantling Installation instructionsProtective foil Connection for air extraction Condensate trap With air extraction Recirculation modeSilencer Air extraction with external motorElectrical connection Operation with control module DSM Connection to a light switchInstallation Potential free connectionTechnical data Fan performancePage Page Page Alteration rights reserved Nr 201 520