Technical safety

Warning and Safety instructions

Before installation, check the rangehood for visible signs of damage. Do not install and use a damaged appliance. A damaged appliance is dangerous.

Before connecting the appliance to the mains supply, make sure that the voltage and frequency details given on the data plate correspond to the on-site electricity supply, otherwise the appliance could be damaged. Consult a qualified electrician if in any doubt.

The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and tested regularly and, where there is any doubt, the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

For safety reasons, this appliance may only be used when it has been fully installed.

Only open the housing as described in the instructions given in the installation sheet and in the Cleaning and care section of this booklet. Under no circumstances should any other parts of the housing be opened. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user, and can cause operational faults.

Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

Faulty components must only be replaced by genuine Miele original parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.

During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. It is only completely isolated from the electricity supply when:

–it is switched off at the mains fuse,

–the screw-out fuse is removed (in countries where this is applicable),

–it is switched off at the wall socket and the plug is withdrawn from the socket, or it is switched off at the isolator.

If the appliance is connected via a plug: Do not pull the mains connection cable but the mains plug to disconnect your appliance from the mains electricity supply.

DA 428-4 EXT, DA 429-4, DA 429-4 EXT, DA 428-4 specifications

The Miele DA 429-4, DA 428-4, DA 429-4 EXT, and DA 428-4 EXT are premium range hoods designed for modern kitchens, combining elegance, advanced technology, and functionality. Each model is engineered to provide efficient ventilation while enhancing the aesthetic appeal of your cooking space.

One of the standout features of these range hoods is their powerful extraction capabilities. With high extraction rates, these models effectively eliminate unwanted odors, smoke, and grease, ensuring a cleaner and more pleasant cooking environment. The innovative motor technology used in Miele hoods allows for quiet operation even at higher speeds, making your kitchen a serene space for cooking and family gatherings.

The design of the Miele DA clean line series is sleek and contemporary, fitting seamlessly into various kitchen decors. The stainless steel finish is not only durable but also adds a touch of sophistication. The clear glass elements in certain models enhance the visual appeal while ensuring that the range hood remains a focal point of the kitchen.

Low energy consumption is another hallmark of the Miele DA series. The LED lighting integrated into the hoods provides effective illumination of the cooking area while consuming less energy than traditional bulbs. This commitment to sustainability not only reduces electricity bills but also reflects Miele's dedication to environmental consciousness.

The range hoods include innovative features such as the CleanCover, which provides a smooth surface for easy cleaning, and the ComfortClean function, allowing for dishwasher-safe parts that simplify maintenance. The *Miele Con@ctivity* technology enables the range hoods to communicate with Miele cooktops, adjusting the power of the hood automatically based on the cooking activity.

The *Intensive* setting is a critical feature that provides a powerful boost in ventilation for shorter periods, managing to clear out heavy odors and smoke quickly. Additionally, Miele's focus on user-friendly controls allows for straightforward operation, whether through touch-sensitive buttons or easy-to-access switches, making it simple to adapt the fan speed to your cooking needs.

In conclusion, the Miele DA 429-4, DA 428-4, DA 429-4 EXT, and DA 428-4 EXT represent the pinnacle of kitchen ventilation technology. With their blend of aesthetic design, high performance, energy efficiency, and innovative features, these range hoods are an excellent investment for any modern kitchen, ensuring a cleaner and more enjoyable cooking experience.