Operation
Filter timers
A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned.
After the grease filters have been cleaned and put in place, the grease filter timer must be reset.
^To do this, press the grease filter button for about 3 seconds.
The indicator will go out.
Checking the filter timers
To check the percentage of time already used:
^Press the On/Off button to turn the fan on.
^Press and hold the grease button.
The number of flashing
1 indicator | = less than | 25 % |
2 indicators | = less than | 50 % |
3 indicators | = less than | 75 % |
4 indicators | = less than 100 % | |
This information will remain stored in memory in the event of a power failure.
14