Miele DA 402 installation instructions Changing the light bulb, Cleaning and Care

Page 18
Changing the light bulb

Cleaning and Care

Changing the light bulb

Before changing the light bulbs, disconnect the hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker.

When in use halogen bulbs become extremely hot, and they can burn your hands. Do not attempt to change the bulbs until they have had sufficient time to cool.

Do not touch the bulb surface. Fingerprints or body oils deposited on the bulb will decrease the life of the bulb.

Follow the bulb manufacturer’s instructions.

^To change the halogen bulb first remove the lamp cover, a.

^Pull the bulb, b, out of its socket and replace with a new one.

^Return the lamp cover, a.

Never use the lighting without the lamp cover, a, in place. The glass is specially made to filter harmful light rays.

18

Image 18
Contents Operating and Installation Instructions Ventilation System DACleaning and Care ContentsIMPORTANT SAFETY INSTRUCTIONS After Sales Service Installation instructionsIMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS NEVER PICK UP A FLAMING PAN - You may be burned BE CAREFUL TO PREVENT BURNSEVACUATE AND CALL THE FIRE DEPARTMENT ONLY ifInstallation Functional description dai1664 Guide to the appliance5m15 + 5m15dControl panel eGrease filter fOverhead lighting hOn/Off button iFan power selectionaChimney extension bChimney cCanopy gLight buttonSelecting the power level OperationTurning on the fan Fan performance Delayed Shut Down Turning off the fanAutomatic Safety Shut Off Turning the lighting on/off Dimming the lightingFilter timers Checking the filter timersReprogramming the timers Cleaning and Care Cleaning the casingGrease filters Cleaning the grease filtersChanging the light bulb After Sales Service Page Installation Instructions Page Caring for the environment Disposal of packing materialDisposal of an old appliance Installation accessories c1 reducing collar for use with Plywood backing To install a plywood backingElectrical data THIS APPLIANCE MUST BE GROUNDEDAppliance dimensions 22 55 cm above electric cooktops Dismantling InstallationInstallation instructions Protective filmAir extraction Condensate trap Page Page Page Alteration rights reserved M.-Nr.06