Replacing HEPA Exhaust Filter

Replacing HEPA Exhaust Filter

 

Exhaust Filter

 

Filtre

 

d’évacuation

 

Filtro de

Exhaust

salida

 

Filter Cover

 

Couvercle

 

du filtre

Air

d’évacuation

Flow

Cubierta de

 

flitro de salida

 

 

Tabs

 

Languettes

 

Lengüetas

Exhaust

 

Filter Seal

Joint du filtre d'évacuation Sello gris de filtro de salida

Exhaust

Filter

Filtre

 

d’évacuation

low

 

A

 

ir

 

F

Filtro

 

de escape

 

The HEPA exhaust filter removes dirt from recirculated air.

Check filter after emptying dust bin. Replace when dirty.

To remove, pull out on both sides of the exhaust filter cover.

Grasp the exhaust filter and pull out to remove.

Ensure foam edge of the filter is facing towards the vacuum cleaner when placing filter into filter compartment. Push only on filter frame.

Reinstall exhaust filter cover by snapping into place.

*Filter cannot be cleaned and should be replaced at least once each year.

Cleaning Agitator

Ensure ON-OFF switch is OFF. Disconnect power cord from outlet.

Clean agitator after every five uses.

Turn vacuum over, exposing the agitator.

Cut off any carpet pile and lint entangled around agitator with a pair of scissors.

- 34 -

Page 34
Image 34
Panasonic MC-V7600 Replacing HEPA Exhaust Filter, Cleaning Agitator, Filter Seal, Filtro de, salida, Cubierta de