Panasonic MC-V7600 operating instructions Assembly, Attaching Handle

	ASSEMBLY
	Attaching Handle
		1)
Handle		➢ DO NOT plug in until assembly is
Manche		complete.
Mango
Handle Screw		➢ Turn ON-OFF switch OFF.
		➢ Remove two (2) handle screws
Vis du manche
Tornillo del mango		provided.
	Note: Do Not	➢ Position handle as shown in
	Remove Tape	illustration.
	Remarque: Ne pas
Electrical	retirer la bande	➢ When installing the handle, firmly
Connection	adhésive	press the handle onto the body.
Connexion	Nota: No quita cinta
		Secure with handle screws provided.
électrique	Tape
Conexión
	Bande	➢ Insert screw.
eléctrica
	adhésive
	Cinta	➢ Tighten screws.
		2)
Locking		➢ Make sure the quick release upper
Notch		cord hook is in the upright position.
Encoche
de blocage		➢ Remove the wire tie from the power
Hendidura
		cord.
de fijación
Power Cord		➢ Lock the power cord into the locking
Cordon
		notch base by pressing it into the
d’alimentation
Cordón		quick release upper cord hook as
electrico		shown.

Note: This helps keep the power cord out from under the vacuum cleaner agitator.

	Quick Release	3)
Power	Upper Cord Hook
	Crochet supérieur
Cord		➢ Wrap the power cord around the upper
	de rangement du
Cordon
	cordon à dégagement	and lower cord hooks and lock the
d’alimentation
	rapide
Cordón		power cord plug onto the power cord.
	Sujetador de
electrico
	liberación rapida
	del cordón
	Lower
	Cord Hook
	Crochet de cordon
	inférieur
	Compartimiento
	inferior para el
	cordón

- 12 -