Filter Changing and Cleaning
Cleaning Cam | Slot |
Came de nettoyge | Fente |
Leva limpiadora | Ranura |
Primary
Filter
Filtre primaire
Filtro primario
Filter Cover | Locking Tab | |
Loquet de blocage | ||
|
Couvercle du filtre
Tapa del filtro
Cleaning Cam | Slot |
Came de nettoyge | Fente |
Leva limpiadora | Ranura |
Primary
Filter
Filtre primaire
Filtro primario
Filter Cover | Locking Tab | |
Loquet de blocage | ||
|
Couvercle du filtre
Tapa del filtro
➢Check primary filter frequently and clean when dirty.
➢To remove primary filter, remove the dust bin and dust bin lid assembly as outlined in the DUST BIN CLEANING section.
➢While holding primary filter over a trash container grasp filter, rotate and lift off.
➢Clean primary filter by gently tapping over a trash container. Tap on several sides to ensure best cleaning.
➢Rinse with water only as needed, do not use any detergent or soap.
➢Allow the filter to dry for 24 hours before putting it back into the vacuum cleaner.
➢When cleaning the filter no longer restores vacuum suction to full power you need to replace the filter.
TO REPLACE PRIMARY FILTER
➢With slot side on filter towards the filter cover slide cleaning cam inside opening, rotate filter clockwise until slots lock onto tabs in cover.
Note: Under normal use and care, your filter can be expected to last up to 5 years.
➢
- 32-
