Installation accessories
a3 protective shields to prevent scratches to the chimney during installation.
b2 hose clips for securing the ducting.
c1 reducing collar for use with 5"
(125 mm) exhaust ducting.
dTelescopic retaining plate secures the chimney extension
8 large headed screws 5 x 40 mm
for securing the retaining plates and the canopy.
(S8 wall anchors included in the packaging are not for use in USA / CDN.)
Caution: During the installation process, please be careful of sharp edges.
2 M 6 locking nuts for securing the motor assembly.
2 screws 3.9 x 7.5 mm for securing the chimney.
1 allen wrench
for adjusting the unit height
1 lever for dismantling the chimney
Installation instruction sheet
25