Electrical connection
Electrical connection - CDN
The extractor is supplied with a 1.10 m power supply cable ready for connec- tion to a 120 VAC, 60 Hz supply.
The rated load is 110 W. Fuse rating is 10 A.
Caution:
Make sure the power supply is OFF during installation.
Important
The wires of the power cord are co- lored as follows:
Green = ground
Black = live
White = neutral
WARNING
THIS APPLIANCE MUST BE GROUNDED
Electrical connection - USA
The extractor is supplied with a 4 ft cord ready for connection to a
120 VAC, 60 Hz power supply. Connec- tion should be made in an appropriate junction box.
The rated load is 110 W. Fuse rating is 10 A.
Important
The wires of the power cord are color- coded as follows:
Green/Yellow = ground
Blue = neutral
Brown = live
As the colors of the wires in the power supply cord of this appliance may not correspond with the colors of the wires in your junction box, proceed as follows:
The green and yellow wire must be con- nected to the ground wire.
The blue wire must be connected to the neutral wire.
The brown wire must be connected to the hot wire.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
12