Miele DA 289-3 installation instructions Standard unit height H =, Distance S above the cooktop

Page 27

Appliance dimensions

Cut out area in wall or ceiling for entrance of 6" (150 mm) ductwork or 5" (125 mm)

ductwork with a reducing collar.

Standard unit height H =

37 13/16" - 51 15/16" (960 – 1320 mm)

Distance S above the cooktop

Do not install this exhaust hood over cooktops burning solid fuel.

When installing the hood, make sure that the minimum safety distance (S) between the top of a Miele

cooktop and the bottom of the hood is at least 14 3/8" (365 mm).

For non-Miele cooking appliances maintain the safety distances recom- mended by the cooktop manufac- turer in their installation and operat- ing instructions.

If there is more than one appliance beneath the hood and they have dif- ferent minimum safety distances al- ways select the greater distance.

See "IMPORTANT SAFETY IN- STRUCTIONS" for further informa- tion.

Read the entire installation procedure and determine height (S) before begin- ning the installation. Installations differ depending on the model and venting method. If the hood is fitted flush to the ceiling, the sum of S + H + Workspace should not exceed the room height.

27

Image 27
Contents Operating and installation instructions Ventilation System Table of contents Important Safety Instructions Use Be Careful to Prevent Burns To reduce the risk of fire, use only metal ductwork InstallationFunctional description Guide to the hood On/Off button Fan power selection Delayed shut downGrease filter button Turning on the fan Main power switch Selecting the power levelIntensive setting OperationDimming the lighting Automatic Safety Shut OffTurning off the fan Turning the lighting on/offChecking the grease filter timer Grease filter timerReprogramming the grease filter timer Removing the grease filter Cleaning and careGrease filter and air intake panel Removing the air intake panelCleaning and care Cleaning the casing Stainless steelStainless steel colored controls Changing the light bulbs After Sales Service Installation instructions Air extraction Caring for the environment Disposal of packing materialDisposal of an old appliance Installation accessories Installation instruction sheet Protective shieldsReducing collar Plywood backing To install a plywood backingThis Appliance Must be Grounded Electrical dataAppliance dimensions Distance S above the cooktop Standard unit height H =Protective film InstallationInstallation instruction DismantlingAir extraction Condensate trap Page Alteration rights reserved /5002

DA 289-3 specifications

The Miele DA 289-3 is a high-performance range hood designed to enhance your kitchen environment by efficiently removing smoke, grease, and odors. Known for its sleek design and powerful functionality, this stylish range hood seamlessly blends into modern kitchens while delivering exceptional results.

One of the standout features of the Miele DA 289-3 is its impressive extraction capacity. With a maximum airflow of up to 650 cubic meters per hour, it ensures that even the most intense cooking sessions leave no trace of unwanted smells or vapors. The range hood operates on three power levels, allowing users to tailor the extraction speed according to their cooking needs.

The DA 289-3 is equipped with innovative technologies that further boost its efficiency. Miele's CleanCover technology ensures that the internal surfaces of the hood are easy to clean and maintain. Additionally, the range hood utilizes optimal lighting with its energy-efficient LED lights, which not only illuminate the cooking area but also enhance visibility, enabling you to monitor your culinary creations effortlessly.

Another noteworthy characteristic of the Miele DA 289-3 is its quiet operation. The noise level is kept to a minimum, even at the highest settings, ensuring a peaceful cooking experience. This is made possible thanks to its advanced motor technology that reduces vibrations and minimizes sound, making the kitchen a more pleasant environment for family and guests.

The Miele DA 289-3 also features a delay shut-off function, which allows the hood to continue operating for a few minutes after cooking has finished. This ensures that any lingering odors are effectively removed, providing a fresh and clean atmosphere.

Additionally, the hood comes with a filter saturation indicator that alerts the user when it's time to clean or replace the filters. Miele uses high-quality dishwasher-safe metal filters that are designed to capture grease and are easy to maintain.

Overall, the Miele DA 289-3 combines elegant design with top-of-the-line technology, making it a coveted addition to any kitchen. With its powerful ventilation, user-friendly features, and efficient operation, it stands as a testament to Miele's commitment to quality and innovation in kitchen appliances.