Miele DA 289-3 Installation, To reduce the risk of fire, use only metal ductwork

Page 6

IMPORTANT SAFETY INSTRUCTIONS

Installation

,WARNING

To reduce the risk of fire, use only metal ductwork.

When installing the hood, make sure that a minimum safety dis- tances of 14 3/8" is maintained between a Miele cooktop and the bottom of the

hood.

If local building codes require a greater safety distance, follow their require- ment.

For non-Miele cooking appliances maintain the safety distances recom- mended by the cooktop manufacturer in their installation and operating instructions.

If there is more than one appliance beneath the hood and they have differ- ent minimum safety distances always select the greater distance.

Be careful not to damage hidden electrical wiring or plumbing when

cutting or drilling into the wall or ceiling.

Do not use an extension cord to connect the appliance to electricity.

Extension cords do not guarantee the required safety of the appliance, (e.g. danger of overheating).

Do not install this hood over cooktops burning solid fuel.

Any fittings, sealant, or materials used to install the ductwork must be made of approved non-flammable

materials.

Never connect an exhaust hood to an active chimney, dryer vent, vent flue, or room ventilating ductwork. Seek professional advice before connecting

an exhaust hood vent to an existing, inactive chimney or vent flue.

Ducted fans must always be vented outdoors.

Make sure that the airflow in the room is sufficient for combustion

and exhausting of all non-electric heat- ing appliances (water heaters, gas cooktops, gas ovens, etc.), otherwise backdrafts may occur. Follow the heat- ing manufacturer’s guidelines and safety standards or those published by the National Fire Protection Association (NFPA), or the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE).

If in doubt, consult an experienced professional.

6

Image 6
Contents Operating and installation instructions Ventilation System Table of contents Important Safety Instructions Use Be Careful to Prevent Burns Installation To reduce the risk of fire, use only metal ductworkFunctional description Guide to the hood On/Off button Fan power selection Delayed shut downGrease filter button Operation Main power switch Selecting the power levelIntensive setting Turning on the fanTurning the lighting on/off Automatic Safety Shut OffTurning off the fan Dimming the lightingGrease filter timer Checking the grease filter timerReprogramming the grease filter timer Removing the air intake panel Cleaning and careGrease filter and air intake panel Removing the grease filterCleaning and care Cleaning the casing Stainless steelStainless steel colored controls Changing the light bulbs After Sales Service Installation instructions Air extraction Caring for the environment Disposal of packing materialDisposal of an old appliance Installation accessories Installation instruction sheet Protective shieldsReducing collar To install a plywood backing Plywood backingElectrical data This Appliance Must be GroundedAppliance dimensions Standard unit height H = Distance S above the cooktopDismantling InstallationInstallation instruction Protective filmAir extraction Condensate trap Page Alteration rights reserved /5002

DA 289-3 specifications

The Miele DA 289-3 is a high-performance range hood designed to enhance your kitchen environment by efficiently removing smoke, grease, and odors. Known for its sleek design and powerful functionality, this stylish range hood seamlessly blends into modern kitchens while delivering exceptional results.

One of the standout features of the Miele DA 289-3 is its impressive extraction capacity. With a maximum airflow of up to 650 cubic meters per hour, it ensures that even the most intense cooking sessions leave no trace of unwanted smells or vapors. The range hood operates on three power levels, allowing users to tailor the extraction speed according to their cooking needs.

The DA 289-3 is equipped with innovative technologies that further boost its efficiency. Miele's CleanCover technology ensures that the internal surfaces of the hood are easy to clean and maintain. Additionally, the range hood utilizes optimal lighting with its energy-efficient LED lights, which not only illuminate the cooking area but also enhance visibility, enabling you to monitor your culinary creations effortlessly.

Another noteworthy characteristic of the Miele DA 289-3 is its quiet operation. The noise level is kept to a minimum, even at the highest settings, ensuring a peaceful cooking experience. This is made possible thanks to its advanced motor technology that reduces vibrations and minimizes sound, making the kitchen a more pleasant environment for family and guests.

The Miele DA 289-3 also features a delay shut-off function, which allows the hood to continue operating for a few minutes after cooking has finished. This ensures that any lingering odors are effectively removed, providing a fresh and clean atmosphere.

Additionally, the hood comes with a filter saturation indicator that alerts the user when it's time to clean or replace the filters. Miele uses high-quality dishwasher-safe metal filters that are designed to capture grease and are easy to maintain.

Overall, the Miele DA 289-3 combines elegant design with top-of-the-line technology, making it a coveted addition to any kitchen. With its powerful ventilation, user-friendly features, and efficient operation, it stands as a testament to Miele's commitment to quality and innovation in kitchen appliances.