Miele DA 289-3 installation instructions Plywood backing, To install a plywood backing

Page 24

Plywood backing

The majority of the weight of the in- stalled ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the re- quired locations, a plywood backing (min. 1/2" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.

(If plywood backing is not needed, pro- ceed to the included installation sheet.)

To install a plywood backing

^Determine and mark the location of the retaining plate for the canopy as outlined on the installation sheet.

^Make a cutting line 3" (76 mm) above and 3" (76 mm) below the outline of the retaining plate.

^Find the studs to the left and right of the mounting location by tapping the wall or using a stud finder.

^Mark a vertical cutting line along the center of each stud.

Be careful not to damage any wiring or plumbing that may be located be- hind the wall. Make sure that the power supply to the area where this installation is being performed has been turned off at the breaker panel before cutting into the wall.

^Remove the drywall between the cut-

ting lines and replace it with plywood of a matching thickness (min. 1/2" (13 mm) thick). Tape the joints and refinish the wall.

^Proceed to the included installation sheet to complete the installation.

24

Image 24
Contents Operating and installation instructions Ventilation System Table of contents Important Safety Instructions Use Be Careful to Prevent Burns Installation To reduce the risk of fire, use only metal ductworkFunctional description Guide to the hood On/Off button Fan power selection Delayed shut downGrease filter button Main power switch Selecting the power level Intensive settingOperation Turning on the fanAutomatic Safety Shut Off Turning off the fanTurning the lighting on/off Dimming the lightingGrease filter timer Checking the grease filter timerReprogramming the grease filter timer Cleaning and care Grease filter and air intake panelRemoving the air intake panel Removing the grease filterCleaning and care Cleaning the casing Stainless steelStainless steel colored controls Changing the light bulbs After Sales Service Installation instructions Air extraction Caring for the environment Disposal of packing materialDisposal of an old appliance Installation accessories Installation instruction sheet Protective shieldsReducing collar To install a plywood backing Plywood backingElectrical data This Appliance Must be GroundedAppliance dimensions Standard unit height H = Distance S above the cooktopInstallation Installation instructionDismantling Protective filmAir extraction Condensate trap Page Alteration rights reserved /5002

DA 289-3 specifications

The Miele DA 289-3 is a high-performance range hood designed to enhance your kitchen environment by efficiently removing smoke, grease, and odors. Known for its sleek design and powerful functionality, this stylish range hood seamlessly blends into modern kitchens while delivering exceptional results.

One of the standout features of the Miele DA 289-3 is its impressive extraction capacity. With a maximum airflow of up to 650 cubic meters per hour, it ensures that even the most intense cooking sessions leave no trace of unwanted smells or vapors. The range hood operates on three power levels, allowing users to tailor the extraction speed according to their cooking needs.

The DA 289-3 is equipped with innovative technologies that further boost its efficiency. Miele's CleanCover technology ensures that the internal surfaces of the hood are easy to clean and maintain. Additionally, the range hood utilizes optimal lighting with its energy-efficient LED lights, which not only illuminate the cooking area but also enhance visibility, enabling you to monitor your culinary creations effortlessly.

Another noteworthy characteristic of the Miele DA 289-3 is its quiet operation. The noise level is kept to a minimum, even at the highest settings, ensuring a peaceful cooking experience. This is made possible thanks to its advanced motor technology that reduces vibrations and minimizes sound, making the kitchen a more pleasant environment for family and guests.

The Miele DA 289-3 also features a delay shut-off function, which allows the hood to continue operating for a few minutes after cooking has finished. This ensures that any lingering odors are effectively removed, providing a fresh and clean atmosphere.

Additionally, the hood comes with a filter saturation indicator that alerts the user when it's time to clean or replace the filters. Miele uses high-quality dishwasher-safe metal filters that are designed to capture grease and are easy to maintain.

Overall, the Miele DA 289-3 combines elegant design with top-of-the-line technology, making it a coveted addition to any kitchen. With its powerful ventilation, user-friendly features, and efficient operation, it stands as a testament to Miele's commitment to quality and innovation in kitchen appliances.