Changing the halogen light bulbs

To change the halogen bulbs, first open the canopy.

^Touch the "s" sensor button.

The fan turns on to level "2".

The canopy opens.

^Press and hold the "2" sensor button for approx. 5 seconds, until the fan turns off. The canopy remains open.

Disconnect the exhaust hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker.

^Remove the grease filter from the appliance, see "Cleaning and care / Grease filter".

When in use halogen bulbs become extremely hot, use caution. Do not attempt to change the bulbs until they have had sufficient time to cool.

Do not touch the bulb surface. Fingerprints or body oils deposited on the bulb will decrease its life. Follow the bulb manufacturer’s instructions.

^Through the opening above the light, press the lighting unit slightly downward.

^Then turn the halogen light to the left to remove it from the fixture.

Use the same bulb type as a replacement.

^Screw the new halogen bulb into the fixture and press it upward.

^Put the grease filter back in place.

^Re-connect the exhaust hood to the power supply.

The canopy will now close.