Operation
Reprogramming the grease filter timer
The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40, or 50 hours depending on your cooking habits.
–A time of 20 hours should be programmed in kitchens with frequent pan or deep frying.
–A time of 20 hours should also be programmed if the kitchen is only used occasionally. This will help to prevent grease which has accumulated over a long period of time from hardening on the filters making cleaning more difficult.
–If you typically use very little fat for cooking, an interval of 40 or 50 hours can be selected.
To reprogram the timer:
^Touch the "s" sensor button to turn off the fan.
^Touch the sensor buttons "5m15" and "l" at the same time.
The sensor button "l" and one of the sensor buttons "1" to "4" will flash.
The sensor buttons "1" to "4" show the amount of time set:
Sensor button "1" = 20 hours Sensor button "2" = 30 hours Sensor button "3" = 40 hours Sensor button "4" = 50 hours
^To select a shorter time, touch the sensor button "1".
To select a longer time, touch the sensor button "4".
Hold the sensor button until the desired time is set.
^Confirm the process by touching the "l" button.
All the lights go out.
If the procedure is not confirmed within 4 minutes of programming, the hood will automatically default to the "old" data.
Sensor button tone
Whenever you select a feature with the sensor buttons, a brief tone is heard.
You can
^Touch the "s" sensor button to turn off the fan.
^Simultaneously, press and hold the sensor buttons "4" and "l" for approx. 5 seconds, until a brief tone is heard. The tone is now turned off for all functions.
^To
If the exhaust hood is disconnected from the power supply, or after a power interruption, the tone is automatically
14