Miele DA 229-2 installation instructions Appliance dimensions

Do not install this exhaust hood over cooktops burning solid fuel.

When installing the hood, make sure that the following minimum dis- tance (S) between the top of a Miele cooking surface and the bottom of the hood is:

-22" (55 cm) above electric cooktops

-26" (65 cm) above gas cooktops

-26" (65 cm) above an open grill

For non-Miele cooking appliances maintain the safety distances recom- mended by the cooktop manufac- turer in their installation and operat- ing instructions.

If there is more than one appliance beneath the hood and they have dif- ferent minimum safety distances al- ways select the greater distance.

See "Warning and Safety instruc- tions" for further information.

26" (65 cm) is recommended for all in- stallations to allow for optimum work space under the hood.

Read the entire installation procedures and determine height S before begin- ning the installation.

If the hood is fitted flush to the ceiling make sure that the remaining distance to the ceiling is not greater or less than appliance height H.

Standard unit height H:

DA 229-2. . . . . . . . . . . . . 29 1/8" - 42 1/8"

. . . . . . . . . . . . . . . . . . (740 - 1070 mm)

To fit the chimney, distance A between the top of the chimney and the ceiling must be at least 7/8" (20 mm).

Cut out area in wall or ceiling for entrance of 6" (150 mm) ductwork or 5" (125 mm)

ductwork with a reducing collar.

If the standard unit height H is not suit- able to the kitchen’s ceiling height, lon- ger optional chimney extensions are available from your Miele dealer or Miele’s Technical Service Department.

Extension available for this model:

DATK 229-650. . . . . . . . . 42 1/8" - 53 3/4"

. . . . . . . . . . . . . . . 1070 mm - 1350 mm