Miele DA 229-2 Inserting the non-return flap Attaching the motor assembly

^If a non-return flap is not present in the venting system, the non-return flap supplied must be fitted into the exhaust connection on the motor. The flaps must open upwards.

^The hood is designed for 6" (150 mm) exhaust ducting. If 5" (125 mm) ex- haust ducting is used the reducing collar must be fitted into the exhaust connection on the motor (see "Air ex- traction").

^First loosely screw the two locking nuts onto the threaded bolts on re-

taining plate A.

Leave a gap of 1/8" (3 mm) for hang- ing the motor on.

^Fit the motor assembly onto the hooks on retaining plate A and slide down behind the nuts.

^Tighten the nuts.