Miele DA 229-2 Operation, Turning on the fan, Selecting the power level, Intensive setting

Page 9

Operation

Main power switch

Intensive setting

 

Level "4" (yellow indicator) should be

 

used for a short period when frying or

 

cooking food with a strong aroma.

Press the main power switch to "I". The fan and the lighting can now be oper- ated.

If the appliance is not going to be used for a long period of time (e.g. while va- cationing) turn the appliance off by pressing the main power switch to "0".

The next time it is turned on, the hood will operate at the level previously used.

Fan performance

The maximum air flow capacity is

625 cfm. Factors such as narrow duct diameter and bends will affect this value.

Level 1 operates at 40% capacity Level 2 operates at 60% capacity Level 3 operates at 80% capacity Level 4 operates at 100% capacity

Turning on the fan

^Press the On/Off button.

The fan runs at power level "2". The On/Off indicator lights.

Selecting the power level

^Use the pm controls to select the desired power level.

p = increases the fan speed m = decreases the fan speed

Level "1" to "3" (green indicators) are usually sufficient for normal cooking.

Delayed Shut Down

If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be se- lected to allow the hood to continue running for either 5 or 15 minutes.

^Press the Delayed Shut Down button while the fan is still running.

Press once =

5 minute delay

 

(left indicator lights)

Press twice =

15 minute delay

 

(right indicator lights)

To cancel the Delayed Shut Down fea- ture press the button again.

9

Image 9 Contents
Operating and installation instructions Ventilation System Table of Contents Save These Instructions and Review Them Periodically Use InstallationUse an extinguisher only if Be careful to prevent burnsGuide to the appliance Delayed Shut Down Fan power level buttonsOn/Off button Light button Functional description Intensive setting Selecting the power levelOperation Turning on the fanTurning off the fan Turning the lighting on / off Automatic Safety Shut OffChecking the grease filter timer Grease filter timerReprogramming the grease filter timer Cleaning the casing Cleaning and CareStainless steel Stainless steel colored controlsGrease filters Cleaning and Care Changing the light bulb After Sales Service Page Installation instructions Air extraction Caring for the environment Disposal of packing materialDisposal of an old appliance Installation accessories Reducing collar Protective shieldsPlywood backing To install a plywood backing boardThis Appliance Must be Grounded Electrical dataAppliance dimensions Appliance dimensions Retaining plates Attaching the retaining plates To the wall InstallationRetaining plate a Retaining plate B Attaching the canopy Adjusting the canopyInserting the non-return flap Attaching the motor assembly Exhaust connection Electrical connectionAttaching the chimney extension Attaching the chimney Exhaust ducting and connections Air extractionAir extraction Page