Cleaning and care
Changing a light bulb
The halogen lights become very hot when in use.
They can cause burns even after being shut off for some time.
Allow them to cool down for a few minutes before changing them.
Disconnect the hood from the electrical supply before replacing the lights (see "IMPORTANT SAFETY INSTRUCITONS").
Remove the grease filter.
Remove the charcoal filter if the hood is being used in recirculation mode.
Push the button above the lamp down a little.
Turn the halogen light counter- clockwise and pull it out.
Replace it with a new lamp of the same type: GU/GZ 10, 120 V, 50W. Screw the lamp into the socket and push it upwards. Please the follow manufacturer's instructions.
Replace the grease filter and, if being used in recirculation mode, the charcoal filter.
22