Franke Consumer Products FDS 367 W, FDS 307 W Installation, Wall drilling and bracket fixing

Page 8

INSTALLATION

Wall drilling and bracket fixing

7.3

X

7.2.1

÷1/16"

24"

7.1

4" 5/16

4" 5/16

 

7"1/2

 

 

 

 

H

Wall marking:

•Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the center of the area in which the hood will be installed.

•Draw a horizontal line at 24” above the hob for installation without the back panel, or at height H (height of the visible part of the panel) for installation with the back panel.

•Place bracket 7.3 on the wall as shown about 1/16” from the ceiling or upper limit, aligning the center (notch) with the vertical reference line.

•Mark the wall at the centers of the holes in the bracket.

•Place bracket 7.2.1 on the wall as shown at X” below the first bracket (X = height of the up- per chimney section supplied), aligning the center (notch) with the vertical line.

•Mark the wall at the centers of the holes in the bracket.

•Place bracket 7.1 as shown 4” 5/16 from the vertical reference line and 7” 1/2 above the horizontal reference line.

•Mark the centres of the holes in the bracket.

•Repeat this operation on the other side.

REAR PANEL (OPTIONAL)

The Rear Panel must be fitted before fixing the hood body and, if it is to be fixed at both top and bottom, must be fitted at the correct height prior to installing the bases. As this operation is rather complex, it should be carried out either by the kitchen installer or a qualified person who knows the final dimensions of the units.

For fixing at the top only, proceed as follows:

•Rest the back panel on the base, inserting the lower plate between the upper surface and the wall, centring it on the vertical reference line.

•Mark the centres of the two holes in the upper plate.

•Drill ø 5/16” holes at all the centre points marked.

•Insert the wall plugs 11 in the holes.

•Fix the brackets using the 12a screws supplied.

•Fix the back panel (where present) using the 12a screws supplied.

EN

 

8

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Beach Index Read and Save These Instructions R N I N G R N I N G Installation Recommendations and SuggestionsUSE CareDimensions ComponentsRear Panel Optional InstallationWall drilling and bracket fixing Mounting the hood body ConnectionsDucted Version AIR Exhaust System Ductless Version AIR OutletChimney assembly Electrical ConnectionUpper exhaust Chimney Lower exhaust ChimneyUSE Control boardRemote Control Optional Alarm resetCleaning the filters CareReplacing the Charcoal Filter Light ReplacementLighting Table DES Matières 114115 116 117 Conseils ET Suggestions UtilisationEntretien Protecteur ThermiqueDimensions et Principales Pièces ComposantesPerçage de la paroi et fixation des brides Panneau Arrière OptionMontage du corps de la hotte BranchementsSortie D’AIR Version Aspirante Sortie D’AIR, Version NON CarénéesMontage de la cheminée Branchement ÉlectriqueCheminée d’échappement supérieure Cheminée d’échappement inférieureTableaux des commandes UtilisationTélécommande EN Option Rétablissement du signal d’alarmeSoin ET Entretien Nettoyage des filtresDéclenchement du signal d’alarme Remplacement DES AmpoulesÉclairage Changement des filtresPage Page 43600425101

FDS 307 W, FDS 367 W specifications

Franke Consumer Products is a leading name in the kitchen solutions sector, known for its innovative and high-quality products. Among its extensive range, the FDS 307 W and FDS 367 W models stand out for their exceptional design and functionality, tailored to meet the needs of modern kitchens.

The Franke FDS 307 W is a 30-inch cooktop that features a sleek and minimalist design, making it a perfect fit for contemporary kitchens. One of its main features is the advanced induction technology, which ensures precise heat control and energy efficiency. This means that cooking can be done more quickly while utilizing less power compared to traditional gas or electric cooktops. The FDS 307 W offers multiple heat settings and a booster function, allowing users to heat large pots and pans rapidly when necessary.

In addition to its performance, safety is also a prime concern for Franke. The FDS 307 W is equipped with an automatic shutoff feature that activates after a period of inactivity, thereby minimizing the risk of accidents. Furthermore, the child lock function prevents unintended adjustments, making it an ideal choice for families.

On the other hand, the Franke FDS 367 W is a 36-inch cooktop that takes cooking experiences to the next level. It combines a modern design with exceptional versatility. This model features a combination of induction zones along with a convenient flex zone, which allows for the use of larger cookware or multiple small pots simultaneously. With its sophisticated touch controls, adjusting settings is straightforward and user-friendly, ensuring a smooth cooking experience.

Both the FDS 307 W and FDS 367 W follow environmentally conscious manufacturing practices, ensuring that their products are not only efficient but also sustainable. The sleek glass-ceramic surface makes cleaning a breeze, as spills can be easily wiped away without the need for harsh chemicals.

With their blend of style, safety, and innovative technology, the Franke FDS 307 W and FDS 367 W cooktops are an excellent investment for anyone looking to enhance their kitchen's functionality. Whether you are an aspiring chef or an everyday home cook, these models promise to elevate your culinary adventures while complementing the modern aesthetic of your kitchen.
Top Page Image Contents