Cleaning the Tape-Handling Parts
Dirt, dust, or particles of the tape’s coat- ing can accumulate on the tape heads and other parts that the tape touches. This can greatly reduce the telephone cassette recorder’s performance. Use the following cleaning procedure after about every 20 hours of operation.
1.Remove the batteries and discon- nect the AC adapter.
2.Open the cassette compartment door.
3.Hold down the protection tab sensor in the tape compartment while you press RECORD to expose the tape- handling parts.
4.Use a swab dipped in tape head cleaning solution or denatured alco- hol to gently clean the record/play head, pinch roller, capstan, erase head, and tape guides.
Tape Guides
Rubber
Pinch Roller
Capstan | Cotton Swab | Record and |
| ||
| Erase Heads | |
|
|
5.When you finish cleaning, press STOP/EJECT and close the compart- ment.
Your local RadioShack store carries a complete line of tape
14
THE FCC WANTS YOU TO KNOW
In the unlikely event that your telephone cassette recorder causes problems on the phone line, the phone company can disconnect your service. The phone company attempts to notify you in ad- vance. If advance notice is not practical, the phone company notifies you of your right to file a complaint with the FCC.
Also, the phone company can make changes to its lines, equipment, opera- tions, or procedures that could affect the operation of your telephone cassette re- corder. The phone company notifies you of these changes in advance, so you can take steps to prevent interruption of your phone service.
LIGHTNING
Your telephone cassette recorder has
Lightning damage is not common. Nev- ertheless, if you live in an area that has frequent electrical storms, we suggest that you unplug your telephone cassette recorder during storms to reduce the possibility of damage.