Miele KM5600, KM5617 installation instructions All other fault, Codes

Page 42

Problem solving guide

Problem

Possible cause

Remedy

The sensors are The sensitivity level of the

Make sure that there is no

over-sensitive or sensors has changed.

direct light (from the sun or

do not react at

from an artificial source)

all.

 

falling onto the hob and that

An F lights up in

the surrounding area is not

too dark.

the rear left

 

cooking zone

Make sure that there is

 

display and an E

nothing covering the sensors

 

lights up in the

or the hob. Take any pans off

 

rear right cooking

the hob and wipe away any

 

zone display and

food deposits.

 

numbers appear

Interrupt the power supply to

in the displays at

the hob for approx. 1 minute.

the front.

 

If this does not solve the

left

right

problem, please call the Miele

Service department.

 

 

90 A calibration fault has

9

1

occurred after the reset

 

function has been activated

 

9

2

 

or after an interruption to the

 

 

 

 

9

3

power supply. If the displays

 

 

 

do not go out after 5 minutes,

 

 

 

proceed as described under

 

 

 

"Remedy" on the right.

 

3

7

The overheating protection

No remedy necessary.

 

 

mechanism for the control

You can use the hob again as

 

 

panel has triggered.

soon as the fault code goes

 

 

 

out (see "Overheating

 

 

 

protection").

 

 

 

All other fault

A fault with the electronics

Interrupt the power supply to

codes

 

has occurred.

the hob for approx. 1 minute.

 

 

 

If the problem persists after

 

 

 

reconnecting the appliance to

 

 

 

the power supply, please

 

 

 

contact the Miele Service

 

 

 

department.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operating and installation instructions Ceramic hobs Contents Cleaning and care Guide to the appliance ModelsGuide to the appliance Control panels Sensors for Indicator lampsTimer display Cooking zone displaysCooking zones Zone Rating in watts for 230Correct application Safety with children Technical safety Correct use Page Page Caring for the environment Disposal of the packing materialDisposal of your old appliance Before using for the first time Cleaning for the first timeBefore using for the first time How the cooking zones work Single circle zoneDouble circle zone Operation How the hob is operatedSwitching on a cooking zone, setting a power level Switching onTo switch the hob on Altering the power levelPower level range Cooking process Power levels Standard ExtendedAuto heat-up ActivatingDeactivating Cooking setting Minutes and seconds approx Heat-up timeTo switch on To switch offSwitching off the hob Switching off and residual heat indicatorsSwitching off a cooking zone Residual heat indicatorsLess suitable Suitable pansMost suitable Not suitableTips on saving energy To set the minute minder time TimerMinute minder To change the minute minder timeTo switch a cooking zone off automatically To use both timer functions at the same time To change the automatic switch-off timeSafety features Safety lock / System lockHobs with single circle zones only Activating Hobs with a double circle/extended zone ActivatingSafety switch-off Safety switch-off with an over-long cooking timeSafety switch-off if the sensors are covered Overheating protection Cooking zonesControl panel Cleaning and care To avoid damaging the surface of your appliance, do not useCleaning and care Reset To activate the reset functionAdditional functions To save settings To call up programming modeTo set a programme / status setting To not save settingsProgramme Status Setting Switched on Problem solving guideProblem Possible cause Remedy Hob or cooking Zones cannot beZones switches on Problem Possible cause Remedy After the hob isSwitched on d appears Front left cookingHeat indicators are Problem Possible cause Remedy Hob switches offFunction is switched Contents of the panAll other fault CodesTo test the power level To test the power level Optional accessories Ceramic and stainless steel hob cleaner 250 mlCloth microfibre cloth Safety instructions for installation Safety distance above an interim shelf Safety distance above the hobSafety distances to the sides and back of the hob Flush-fitted hobs Hob with frame or bevelled edges Hob with frame or bevelled edges Seal between the hob and the worktopBuilding-in dimensions Building-in dimensions Installation Worktops made of woodGranite and marble worktops Installing the hob Electrical connection Important U.KWiring diagram After sales service, data plate Page Alteration rights reserved Nr 570 840

KM5617, KM5600 specifications

The Miele KM 5600 and KM 5617 are innovative induction cooktops that exemplify the brand's commitment to quality and advanced cooking technology, designed to enhance the modern kitchen experience. Both models showcase Miele’s dedication to precision, efficiency, and user convenience, making them excellent choices for home chefs and cooking enthusiasts.

One of the standout features of the KM 5600 and KM 5617 is the induction cooking technology. Induction cooking works by using magnetic fields to directly heat pots and pans, providing rapid and consistent cooking results. This method is not only faster than traditional electric or gas cooking but also offers improved energy efficiency. With the ability to heat up pans in seconds, users can boil water or cook a meal in less time, making it ideal for busy kitchens.

The KM 5600 features a sleek, minimalist design that fits seamlessly into any kitchen aesthetic. It boasts four cooking zones, allowing for multiple dishes to be prepared simultaneously. Each cooking zone is equipped with Miele’s powerful induction technology, which provides precise temperature control. The model also includes a TwinBooster feature, which allows for two cooking zones to combine their power for larger pots or extremely high heat settings, making it perfect for tasks that require an extra energy boost.

Meanwhile, the KM 5617 model offers additional functionalities such as a five-zone configuration, providing even more flexibility for cooking. With features like SensorTouch controls, users can easily adjust temperatures and settings with just a light touch, ensuring a user-friendly cooking experience. The automatic heat-up function is another highlight, enabling rapid preheating to quickly reach boiling temperatures before reverting to the desired cooking level.

Safety is a crucial aspect of both models, with features such as overheating protection and automatic shut-off when no cookware is detected. Moreover, the simple-to-clean surface allows for easy maintenance after cooking, as spills are less likely to burn onto the cooktop.

In conclusion, the Miele KM 5600 and KM 5617 induction cooktops bring together cutting-edge technology and superior craftsmanship. With their combination of efficiency, flexibility, and safety features, these models not only meet but exceed the demands of modern cooking, making them an ideal choice for anyone looking to upgrade their kitchen.
Top Page Image Contents