Frequently asked questions
General problems with the dishwasher
Issue | Possible fault | Solution |
The display remains | The display has gone | Touch any control. |
off. | into "Standby" mode to | See "Settings J - Standby" for |
| save energy. | more info. |
The buzzer sounds | The salt container lid | – Close the salt container lid |
during a running | was not closed | If the salt container lid |
program. The display | properly. | opened during a running |
shows the following: |
| program, also: |
Salt container lid |
| – Turn the dishwasher off |
Close the salt container lid |
| and on again with the s |
|
| |
|
| control. |
|
| – Restart the program. |
The display shows the | The middle or lower | Open the dishwasher door |
following: | spray arm is blocked | and rearrange the items |
Middle spray arm blocked | by dishware. | blocking the spray arms. |
or | The spray arm jets of | – Turn the dishwasher off by |
Lower spray arm blocked | the middle or lower | touching the s control. |
| spray arm are clogged. | Then: |
|
| – Clean the spray arms. See |
|
| "User Maintenance |
|
| Instructions". |
56