Frequently asked questions
Issue | Possible fault | Solution |
Dishes are not dry, | The rinse aid setting may | Increase the dosage, refill the |
glasses and | be too low or the rinse aid | reservoir or switch the rinse |
cutlery are | reservoir is empty. | aid product when refilling, see |
spotted? |
| "Before using for the first |
|
| time". |
| Dishes were taken out too | Leave dishes in longer, see |
| soon. | "Use". |
| "2 in 1" or "3 in 1" products | Set the detergent type to |
| were used. These products | "Powder" and insert rinse aid. |
| have a low drying effect. | See "Settings J - Detergent". |
| The detergent "2 in 1" or | Select the detergent setting to |
| "3 in 1" is set, but another | the detergent used. See |
| product was used. | "Settings J - Detergent". |
White residue is | Not enough rinse aid was | Increase the dosage. See |
visible on cutlery | used. | "Settings J - Rinse aid". |
and dishes, | The salt container is empty. | Refill salt, see "Before using |
clouding occurs on |
| for the first time". |
glassware and film |
|
|
Unsuitable "2 in 1" or "3 in 1" | Use a different detergent. | |
can be wiped off. | products were used. | Try normal tabs or powder |
| ||
|
| detergent. |
| The automatic water | Call Miele Technical Service. |
| softener unit is defective. |
|
60