Miele G 1202 manual Default settings

Page 33

Additional options

Default settings

All settings can be reset to the factory default.

Turn the dishwasher off "".

Press and hold the "Start/Stop" button and at the same time turn the dishwasher on "". Hold the "Start/Stop" button until the "Start/Stop" indicator lights up.

If it does not come on, start over.

Press the "Delay Start" button 12 times.

The "Delay Start" indicator gives on long flash and two short flashes in intervals.

The time display shows if a setting was changed.

–"p 1": All settings are factory default.

–"p 0": At least one setting was changed.

To reset the dishwasher to the factory default settings, press the "Start/Stop" button.

The setting is saved.

Turn the dishwasher off "".

33

Image 33

Contents Operating Instructions Dishwasher 1202 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentBefore using for the first time To open the door Child Safety LockTo close the door Water softener Programming the water softener Filling the salt container Salt indicatorAdding rinse aid Rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Cutlery tray Upper basket Adjustable cup rackAdjusting the upper basket Foldable spikes Lower basketRemoveable PlateGuard Plus with SteamGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting and starting a program Turning onProgram guide Program When to use Program sequenceProgram sequence display Time displayAt the end of a program Preparing your appliance for an extended vacaion Changing a program Interrupting a programOptions Additional optionsTurbo TabDelay Start Delay start displayStarting a program before the delay start has elapsed Default settings Technical faults Frequently asked questionsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results Are spotted Problem Possible fault Solution Dishes are not dryWhite residue is Visible on cutleryDiscolored Film cannot Be wiped off Clouding or Problem Possible fault Solution Glasses areEtching on GlassesComparison tests PC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionPlumbing Waterproof systemConnection to the water supply Venting the drainage system DrainagePage Page Alteration rights reserved Nr 768 740 G1202