Miele G 1202 manual Problems water intake/drain

Page 35

Frequently asked questions

Problems water intake/drain

	Problem	Possible fault	Solution
	The "Intake / Drain"	The water supply is	Open the water supply all the
	indicator is flashing.	shut off.	way.
	The dishwasher		Before fixing the fault:
	stops.		–	Turn the dishwasher off "".
	The "Intake / Drain"	Fault F12/F13: Water	–	Open the water supply all the
	indicator flashes.	Fault F12/F13: Water	–	Open the water supply all the
	indicator flashes.	intake fault.		way.
	The time display	intake fault.		way.
	The time display		–	Clean the water intake filter,
	shows FXX.		–	Clean the water intake filter,
	shows FXX.			see "User Maintenance
				see "User Maintenance
				Instructions".
			–	The water pressure at the
				water connection is lower than
				4.35 psi. Consult a plumber.
		Fault F11: Water drain	– Clean the triple filter.
		fault. There may be	– Clean the drain pump and the
		water in the wash		non-return valve.
		cabinet.	See "User Maintenance
			See "User Maintenance
			Instructions".
			–	Remove any kinks in the drain
				hose.

35

Image 35

Contents Operating Instructions Dishwasher 1202 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child Safety Lock Water softener Programming the water softener Filling the salt container Salt indicatorAdding rinse aid Rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Cutlery tray Upper basket Adjustable cup rackAdjusting the upper basket Foldable spikes Lower basketRemoveable PlateGuard Plus with SteamGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent Selecting and starting a program Turning onProgram guide Program When to use Program sequencePreparing your appliance for an extended vacaion Time displayProgram sequence display At the end of a programChanging a program Interrupting a programTab Additional optionsOptions Turbo Starting a program before the delay start has elapsed Delay Start Delay start display Default settings Technical faults Frequently asked questionsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results Visible on cutlery Problem Possible fault Solution Dishes are not dryAre spotted White residue isGlasses Problem Possible fault Solution Glasses areDiscolored Film cannot Be wiped off Clouding or Etching onComparison tests MieleCare After sales servicePC Update RepairsTransport Page User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionConnection to the water supply PlumbingWaterproof system Venting the drainage system DrainagePage Page Alteration rights reserved Nr 768 740 G1202