Miele G 1202 manual General problems with the dishwasher

Page 36

Frequently asked questions

General problems with the dishwasher

Problem	Possible fault	Solution
The display turns off.	The dishwasher has gone	Press any button.
	into "Standby" mode to	The display turns on
	save energy.	again.
Detergent is left in the	The dispenser was damp	Dry the dispenser before
dispenser at the end of	when detergent was	adding detergent.
a program.	added.
The detergent lid	Detergent residue is	Remove the residue.
cannot be closed	blocking the catch.
properly.
The door and the	This is not a fault. It is the	The moisture will
interior walls are still	normal operating mode of	evaporate after a short
wet after a program has	the drying system.	time.
finished.
Water remains in the		Before fixing the fault:
wash cabinet at the end		– Turn the dishwasher off
of a program.		.
	The triple filter in the wash	Clean the triple filter.
	cabinet is clogged.	See "User Maintenance
		Instructions".
	The drain pump or the	Clean the drain pump and
	non-return valve may be	the non-return valve.
	blocked.	See "User Maintenance
		Instructions".
	The drain hose is kinked.	Remove any kinks from
		the drain hose.

36

Image 36

Contents Operating Instructions Dishwasher 1202 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the door Child Safety LockTo close the door Water softener Programming the water softener Salt indicator Filling the salt containerRinse aid Adding rinse aidRinse aid indicator Adjusting the dosageLoading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Cutlery tray Adjustable cup rack Upper basketAdjusting the upper basket Lower basket Foldable spikesRemoveable PlateGuard Plus with SteamGuard Vase / Bottle insert Basket accessories Use DetergentAdding detergent Turning on Selecting and starting a programProgram When to use Program sequence Program guideTime display Program sequence displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a programAdditional options OptionsTurbo TabDelay Start Delay start displayStarting a program before the delay start has elapsed Default settings Frequently asked questions Technical faultsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results Problem Possible fault Solution Dishes are not dry Are spottedWhite residue is Visible on cutleryProblem Possible fault Solution Glasses are Discolored Film cannot Be wiped off Clouding orEtching on GlassesComparison tests After sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsPlumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Page Alteration rights reserved Nr 768 740 G1202