Miele G 4225, G 4220 manual Interrupting a program, Changing a program

Page 32

Use

Interrupting a program

A program will be interrupted as soon as the door is opened.

When the door is closed again, the program will continue from where it was interrupted.

￿Water in the dishwasher is hot. Risk of scalding!

Only open the door if absolutely necessary and be very careful. Before closing the door again, leave it slightly ajar for approx.

20 seconds. This will allow the temperature in the wash cabinet to settle. Then push the door firmly shut until it clicks into place.

Changing a program

Do not change the program if the detergent dispenser flap is already open.

If a program has already started and you wish to change it:

￿Press the Start/Stop button for at least one second.

The program will be canceled.

￿Select and start the desired program.

32

Image 32 Contents
Operating Instructions Dishwasher 4220 G BeforeImportant Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingDisposal of the packing material Disposal of an old machineTo close the door Before using for the first timeTo open the door Child Safety Lock Adding rinse aid Rinse aid indicatorRinse aid Deactivating refill indicators Setting the rinse aid dosage Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Typical load for 10 place settings with cutlery basket Typical load for 13 place settings with cutlery basket Adjustable cup rack Upper basketAdjusting the upper basket Dishwasher with cutlery tray Dishwasher with cutlery basket Lower basketHeavily soiled items Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Starting a program Turning onSelecting a program Program When to use GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programAdditional options TurboDelay start Delay start time shown in the time display Starting a program before Delay start has elapsedMemory Optimize Standby Factory defaults Frequently asked questions Technical faultsFaults in the water intake or water drain General problems with the dishwasher Noises Poor cleaning results Problem Possible fault Solution Dishes areNot clean On the glassesProblem Possible fault Solution Dishes are not dry OrglassesCutlery are spotty White residue isProblem Possible fault Solution Glasses have a Brownish-blueDiscoloration Deposit cannot be Wiped off Glasses are dull DiscoloredAfter sales service PC UpdateRepairs MieleCareUser Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemGeneral requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Alteration rights reserved Nr 510 191 G4220/G4225
Related manuals
Manual 60 pages 53.92 Kb