Miele G 4220, G 4225 manual Cleaning the spray arms, Removing the spray arms

Page 51

Cleaning and Care

Cleaning the spray arms

Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months.

￿Turn off the dishwasher before cleaning.

Removing the spray arms

￿Remove the cutlery tray (if present).

￿Push the upper spray arm up to engage the inner ratchet and unscrew the spray arm.

￿Lift up the middle spray arm, ￿, to engage the ratchet and unscrew the spray arm, ￿.

￿Remove the lower basket.

￿Pull the lower spray arm firmly upwards to remove.

￿Use a pointed object such as a toothpick to push food particles into the spray arm jets.

￿Rinse thoroughly under running water.

￿Return the spray arms and check that they rotate freely.

51

Image 51 Contents
Before Operating Instructions Dishwasher 4220 GContents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Disposal of an old machine Caring for the environmentEnergy saving washing Disposal of the packing materialBefore using for the first time To open the door Child Safety LockTo close the door Rinse aid indicator Rinse aidAdding rinse aid Deactivating refill indicators Setting the rinse aid dosage Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Typical load for 10 place settings with cutlery basket Typical load for 13 place settings with cutlery basket Upper basket Adjustable cup rackAdjusting the upper basket Lower basket Heavily soiled itemsDishwasher with cutlery tray Dishwasher with cutlery basket Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Turning on Selecting a programStarting a program Guide Program When to useStandby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programTurbo Additional optionsDelay start Starting a program before Delay start has elapsed Delay start time shown in the time displayMemory Optimize Standby Factory defaults Technical faults Frequently asked questionsFaults in the water intake or water drain General problems with the dishwasher Noises On the glasses Poor cleaning resultsProblem Possible fault Solution Dishes are Not cleanWhite residue is Problem Possible fault Solution Dishes are not dryOrglasses Cutlery are spottyDiscolored Problem Possible fault Solution Glasses have aBrownish-blue Discoloration Deposit cannot be Wiped off Glasses are dullMieleCare After sales servicePC Update RepairsUser Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainageInstallation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Alteration rights reserved Nr 510 191 G4220/G4225
Related manuals
Manual 60 pages 53.92 Kb