Miele G 5220, G 5225 manual Interrupting a program, Changing a program

Page 39

Use

Interrupting a program

A program will be interrupted as soon as the door is opened.

When the door is closed again, the program will continue from where it was interrupted.

￿Water in the dishwasher is hot. Risk of scalding!

Only open the door if absolutely necessary and be very careful. Before closing the door again, leave it slightly ajar for approx.

20 seconds. This will allow the temperature in the wash cabinet to settle. Then push the door firmly shut until it clicks into place.

Changing a program

Do not change the program if the detergent dispenser flap is already open.

If a program has already started and you wish to change it:

￿Press the Start/Stop button for at least one second.

The program will be canceled.

￿Select and start the desired program.

39

Image 39
Contents Before Operating Instructions Dishwasher 5220 GContents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Disposal of an old machine Caring for the environmentEnergy saving washing Disposal of the packing materialBefore using for the first time To open the door Child safety lockTo close the door Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Adding rinse aid Rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Typical load for 10 place settings with cutlery basket Typical load for 13 place settings with cutlery basket Upper basket Adjustable cup rackAdjusting the upper basket Lower basket Heavily soiled itemsDishwasher with cutlery tray Dishwasher with cutlery basket MultiComfort zone Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Turning the dishwasher on Selecting a programStarting a program Program guide When to use Program sequence Standby Time displayProgram sequence indicator At the end of a programPreparing your appliance for an extended vacation Changing a program Interrupting a programTurbo Additional optionsDelay start Starting a program before Delay start has elapsed Delay start time shown in the time displayOptimize Standby Factory defaults Technical faults Frequently asked questionsFaults in the water intake or water drain General problems with the dishwasher Sounds Glasses Poor cleaning resultsProblem Possible fault Solution Dishes are not CleanWhite residue is Problem Possible fault Solution Dishes are not dryCutlery are SpottedDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsUser Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionPlumbing Plumbing DrainageVenting the drainage system Installation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Page Page Alteration rights reserved Nr 510 211 G5220/G5225
Related manuals
Manual 68 pages 13.47 Kb