Miele G 5225 Problem Possible fault Solution Dishes are not dry, Cutlery are, Spotted, Wiped off

Frequently asked questions

Problem	Possible fault	Solution
Dishes are not dry,	The rinse aid setting may be	Increase the dosage, refill
glasses and	too low, or the rinse aid	the reservoir or switch the
cutlery are	reservoir is empty.	rinse aid product when
spotted.		refilling (see "Rinse aid").
	Dishes were taken out too	Leave dishes in longer (see
	soon.	"Use").
	A "Tab" product was used.	Change the detergent, or
	These products have a low	refill the rinse aid (see "Rinse
	drying effect.	aid").
White residue is	Not enough rinse aid was	Increase the dosage (see
visible on cutlery	used.	"Setting the rinse aid
and dishes.		dosage").
Clouding occurs	The salt container is empty.	Refill the salt container (see
on glassware and
		"Filling the salt container").
cutlery; film can be
	The salt container lid was not	Reseat it making sure it
wiped off.	correctly screwed on.	screws back on correctly.
	Unsuitable "Tab" products	Use a different detergent.
	were used.	Use normal (powder or gel)
		detergent.
	The water softener is	Program a higher water
	programmed on too low a	softener setting (see "Water
	setting.	softener").

50