Miele G 5225, G 5220 manual Deactivate indicators

Page 16

Before using for the first time

Deactivate indicators

If you only ever use "Tab" detergent products in your dishwasher, you can switch both messages off if you wish.

￿ Turn the dishwasher off with the ￿ button.

￿Press and hold the "Start/Stop" button and turn the dishwasher on simultaneously using the ￿ button. Keep the "Start/Stop" button pressed for at least four seconds until the "Start/Stop" indicator light comes on.

If it does not come on, start over.

￿Press the "Delay start" button nine times.

The "Delay start" indicator will flash briefly 9 times in intervals.

The characters flashing in the display will show whether the refill indicators are turned on or off.

"P 1": the refill indicators are turned on.

"P 0": the refill indicators are turned off.

￿Press the "Start/Stop" button if you wish to change the setting.

The setting is saved immediately.

￿Press the ￿ button to turn the dishwasher off.

If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to replenish the salt and rinse aid and to switch the indicators back on.

16

Image 16
Contents Operating Instructions Dishwasher 5220 G BeforeImportant Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingDisposal of the packing material Disposal of an old machineTo open the door Child safety lock Before using for the first timeTo close the door Water softener Programming the water softener Checking the programmed water hardness Filling the salt container Refill salt message Deactivate indicators Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosage Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Typical load for 10 place settings with cutlery basket Typical load for 13 place settings with cutlery basket Adjustable cup rack Upper basketAdjusting the upper basket Heavily soiled items Lower basketDishwasher with cutlery tray Dishwasher with cutlery basket MultiComfort zone Cutlery tray Cutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Selecting a program Turning the dishwasher onStarting a program Program guide When to use Program sequence Time display StandbyAt the end of a program Program sequence indicatorPreparing your appliance for an extended vacation Interrupting a program Changing a programAdditional options TurboDelay start Delay start time shown in the time display Starting a program before Delay start has elapsedOptimize Standby Factory defaults Frequently asked questions Technical faultsFaults in the water intake or water drain General problems with the dishwasher Sounds Poor cleaning results Problem Possible fault Solution Dishes are notClean GlassesProblem Possible fault Solution Dishes are not dry Cutlery areSpotted White residue isProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareUser Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Drainage PlumbingVenting the drainage system Noise measurement Installation requirements for measuring noiseGeneral requirements for measuring noise Noise measurement Page Page Alteration rights reserved Nr 510 211 G5220/G5225
Related manuals
Manual 68 pages 13.47 Kb