Installation
Installation tips
–The warming drawer should be placed at a convenient height for easy access.
–The drawer should be installed clear of drafts caused by open doors and windows.
–Proper clearance must be allowed for the warming drawer to open with out interference.
–The warming drawer must be secured to cabinetry to prevent the drawer from tipping when loaded.
–The warming drawer should be level to prevent the drawer from sliding open or closing on its own.
The drawer cannot be leveled after it has been installed.
If necessary install a shelf within the cabinetry to support the drawer.
Steam from the vents can damage the cabinetry surrounding the warming drawer.
Solo Installation:
A minimum gap of 2" (5 cm) must be present between the upper edge of the warming drawer and the cabinetry.
Installation in combination with an oven:
A minimum gap of 1" (2.5 cm) must be present between the upper edge of the warming drawer and the oven.
This gap should be sealed with a moisture resistant sealing material.
26