Installation
Integrated installations Models 4700 FB and 4800 FB
Custom made front panels can be installed with models 4700 FB and 4800 FB.
Panel dimensions
4700 FB
Width 27 3/8" (695 mm)
Height 11" (279 mm)
4800 FB
Width 29 13/16" (757mm)
Height 11" (279 mm)
The custom panel must be atleast 3/8" (10 mm) thick and made of heat resist- ant material140 °F (60 °C).
aInstall a handle to the custom front panel using counter sunk screws.
bRemove the drawer from the casing. See "Removing the drawer".
The panel attached to the warming drawer front can be used as the drilling template for the custom panel.
cLoosen the two screws on the inner side of the drawer and remove the panel from the appliance front.
dPlace the panel on a firm surface with the adhesive tape facing up. Peel the backing from the adhesive tape.
ePosition the custom panel over the removed panel using the tape to hold it in place.
32