Settings
System lock
The coffee system can be locked so that it cannot be used by children or those not familiar with the operating instructions.
When the machine is locked, the timer setting "Switch on at" will not work.
Activating/Deactivating the System lock
Select "Settings ", confirm with OK.
Settings
Safety
Water hardness
Use < or > to select "Safety", confirm with OK.
Tap < or > until "System lock" is highlighted, confirm with OK.
Use < or > to select "On", confirm with OK.
As soon as the machine is turned off, it will lock and cannot be turned back on. A closed padlock and a message will appear in the display, whenever a button is touched.
To deactivate the system lock, follow the same procedure as above, but select "Off".
Overriding the system lock
Press and hold OK for approx. 3 seconds.
The machine is now temporarily unlocked and can be used to prepare beverages. It will lock again as soon as it is turned off.
Water hardness
The hardness of the water used in the coffee system must be determined and programmed into the appliance. The water hardness will determine how frequently the unit must be descaled to maintain the coffee system properly. The machine monitors the volume of water used (including the amount required for producing steam), and will then let you know when a descaling cycle is necessary.
To measure the hardness of your water, use the test strip that is included in your installation kit.
Place the test strip under your kitchen tap for a second and shake off any remaining water. The result is visible in about 1 minute.
If the water hardness is greater than 40 gr/gal (40°D), the water must be descaled more often than displayed. Calcium will build up faster than at a lower water hardness and may damage the machine.
30