Miele CVA 4062, CVA 4068 installation instructions Latte Macchiato

Page 35

Setting the serving sizes

Setting serving sizes for cappuccino and latte macchiato using OK

Place the cappuccino cup or latte macchiato glass you will be using to set the portion size under the main dispensers.

Select cappuccino or latte macchiato.

Press and hold OK until the display shows the options for Cappuccino (Milk froth, Espresso) or Latte Macchiato (Hot milk, Milk froth, Espresso).

Latte Macchiato

Hot milk

Milk froth

Use < or > to reach the option you wish to program to a certain serving size.

Tap OK to place a check mark next to the desired component to show that you would like to program this component.

Repeat this process until all components you wish to program the serving size for are marked with a check.

Use < or > to select "Start", confirm with OK.

The appliance now begins preparing a cappuccino or latte macchiato.

As soon as the component (which you have checked) is being dispensed, the display will read "Program the amount".

Once the cup is full to your liking with that component and "Save" appears in the display, tap OK to save the amount.

Repeat this process for the other components you have chosen for this type of coffee.

Each time the drink is prepared it will contain the programmed amount of coffee, milk, etc.

35

Image 35

Contents

Operating and Installation Instructions Coffee System CVA Contents Contents Children Proper useTechnical safety Use Save These Instructions and Review Them Periodically Front view Guide to the coffee systemInterior view Included accessories Before the first use First steps to useTouch controls DisplayTurning off Filling the water tank Filling water, beans or ground coffeeFilling ground coffee Filling the bean containerPre-warming cups Preparing drinksTurning on Coffee and espresso prepared from coffee beans Adjusting main dispenser heightInterrupting preparation Coffee and espresso prepared from ground coffeeDouble portion Always pre-warm the cup with hot Beverages with milkPrepare beverages Interrupt preparationTo interrupt preparation, tap OK again Cappuccino, latte macchiato, hot milk, frothUser profile beverages After use To adjust the grinder setting Adjusting the coffee grinderGrinder should be adjusted Language SettingsSettings menu Clock format Setting the time of dayTime of day DisplaySwitch off after TimerSwitch on at Activate Switch off atPre-brewing Amount of coffeeAutomatic rinsing TemperatureSteam system Lighting Adjusting the brightnessInfo displaying No. of drinks Lighting Setting the switch-off timeOverriding the system lock System lockWater hardness Activating/Deactivating the System lock Level 4 very hard Level 1 soft Level 2 moderately hard 4 7 gr/gal 4 7 d Level 3 hard Showroom program Tone optionsUser profiles Restoring factory default settingsAll settings Factory default settingsSetting the serving sizes Latte Macchiato Setting serving sizes via Settings Setting the serving size for hot waterSelecting a user profile User profilesSaving an entry Canceling an entryCreating a user profile Changing a user profileManually When switched onDeleting a user profile RevertRecommended frequency What needs to be done? Cleaning and careQuick Guide Rinsing the system Rinsing the milk pipework Cleaning the milk pipeworkMilk pipework Cleaning clogged milk pipework Cleaning and care Stainless-steel milk container Main dispenser Waste unit Water tankDrip tray cover Drip trayDishwasher Main dispenser connectorBean container Interior and doorBrew unit Cleaning/Degreasing the brew unit Wipe any spills from descaling immediately Please drop the cleaning tablet in the ground coffee funnelExterior Descaling the appliance Descaling Light turns off suddenly Frequently asked questionsDisplay remains dark Possible fault Solution Unit suddenly turns off Possible fault SolutionFrequently asked questions Grinding sounds louder than usual Possible fault SolutionCoffee dispensing is interrupted Possible fault Solution Coffee/espresso is not hot enough Possible fault SolutionDoor cannot be closed Possible fault Solution Frequently asked questions Machine makes loud noises during descaling Water is in the waste unit Possible fault SolutionCoffee water is in the waste unit Possible fault Solution Descaling process was started accidentlyMessage Push water container in as far as it will go appears Door is hard to open and close Grind control slide will not moveStorage drawer cannot be pushed in properly Frequently asked questions Frequently asked questions MieleCare After sales servicePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing material This Appliance Must be Grounded Electrical connectionInstallation options InstallationInstallation Adjusting the door hinges Page Page Page Alteration rights reserved Nr 816 880