![](/images/new-backgrounds/1068774/68774107x1.webp)
Descaling the appliance
Descaling
Maintenance
Tap < or > until "Maintenance " is highlighted, confirm with OK.
Select "Descale" confirm with OK or, if the appliance is switched off: tap OK while switched off.
Select "Start", tap OK to begin the descaling process.
The display prompts the user through the single steps of the descaling process. Follow the prompts.
If the descaling is started while the machine is still hot, the appliance will cool down for 10 minutes before the descaling begins.
The descaling process cannot be canceled once "OK" is selected. The process now needs to be completed. This is a safety feature to ensure the process will be completed. It is important for best results and the longevity of the machine.
To dissolve the descaling tablets:
Remove the water tank and fill it up to the mark with lukewarm water. (Do not
Add 2 descaling tablets to the water and allow them to dissolve completely before closing the water tank and placing it back into the machine.
During the descaling cycle, the descaling
When the display prompts you to Add fresh water to tank, rinse the tank thoroughly with clear water (all traces of descaling residue must be removed) and fill it with clean drinking water up to the mark.
During rinsing, water will run out of the dispensing spouts. Because the inside of the machine is also rinsed out, you must empty the drip tray in the final step.
When the display shows Prog. finished, tap OK.
The appliance is now fully descaled and ready for use.
54