Miele CM 5000 operating instructions Selecting Descale via the Maintenance menu

Page 56

Descaling

^Replace the water container in the coffee system.

When FILL WATER CONTAINER AND PLACE IN MACHINE appears in this display:

^remove the water tank and rinse it carefully with clean water. Be sure that no descaling agent is left in the water container. Fill the water container with cold, clean tap water up to the "Max." mark.

PROGRAM FINISHED will appear in the display when the descaling process has been completed.

^Confirm with OK.

^Wash the cappuccinatore to remove any descaling agent.

^Empty and wash the drip tray.

^Wash the water container.

The descaling program is now complete and drinks can be prepared.

When descaling the machine be sure to wipe away any splashes of descaling agent immediately. These could cause damage.

Selecting Descale via the MAINTENANCE menu

^In the main menu press and hold the OK button for two seconds.

	SETTINGS
<	MAINTENANCE	>

^Turn the rotary selector until MAINTENANCE appears in the display. Confirm with OK.

^Turn the rotary selector until DESCALE appears in the display. Confirm with OK.

^Turn the rotary selector until START appears in the display.

The descaling program cannot be canceled once it has been started.

^Press the OK button.

56

Image 56

Contents Operating Instructions Freestanding coffee machine CM Contents Contents Proper use ChildrenTechnical safety Safety Quick Guide Guide to the machine Display and controls Control Action FunctionAccessories Setting the language First steps to useBefore the first use Turning onWater hardness Setting the clockSetting the time of day Setting the water hardness Level 1 softLevel 2 moderate Level 3 hardFilling the water tank Filling the coffee bean container Turning the machine On / Off Turning offPre-heating cups Preparing coffee or espresso Preparing two portions at one timeCanceling preparation Adjusting the height of the coffee dispensersMaking coffee or espresso using ground coffee Adding ground coffeePreparing coffee/espresso using ground coffee Frothing and heating milk Preparing the milk flaskPreparing milk froth Preparing hot milk After preparing milkMilk temperature Milk froth consistencyPreparing a cappuccino Preparing a Latte MacchiatoPreparing hot water Adjusting the grinder setting To avoid damaging the grinderAdjusting the strength of the coffee Pre-brewing the coffee To turn the pre-brewing function on or offBrewing temperature To set the coffee/espresso temperatureSetting the serving size Programming the amount using the or buttonsProgramming the amount using the Settings menu Settings Menu How to ActionOption Available settings Options menuLanguage Clock format Setting the time of dayTime of day and clock display Switch on at TimerSetting the timer Switch off at Switch off afterTo activate and deactivate the timer Default settings To select the operating mode Operating modesTemporarily deactivating the system lock System lockActivating / Deactivating the system lock Displaying information Wash by hand only Dishwasher safe Cleaning and careHow often Necessary cleaning Rinsing the system Turning the automatic rinsing On / OffRinsing the system manually Cappuccinatore Rinsing the cappuccinatoreMilk flask Water tankDrip tray cover Drip tray and waste containerDrip tray Waste containerCleaning the brew unit Coffee bean containerDo not move the brew unit handle Cleaning/Degreasing the brew unit Exterior Avoid the following on all surfacesDescaling Selecting Descale via the Maintenance menu Turning off Energy saving modeEco-Mode Packing TransportEvaporating the coffee system Frequently Asked Questions Fault messages appear in the displayFault 1, Fault 80 or Fault FaultOpen the Valve Frequently Asked Questions Espresso or coffee flows too slowly into the cup Preparation / dispensing problemsEspresso or coffee flows into the cup too quickly Coffee or espresso is not hot enough Crema on the coffee or espresso is not rightThere is a lot of coffee water in the waste container General problemsWater has stopped flowing when programming the amount Coffee system turns off suddenly Grinder is louder than usual Grinder control will not moveDescaling program was started accidently Loud noised are heard during the descaling programAfter sales service RepairsInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing material Electrical connection Installation Dimensions Page Page Alteration rights reserved Nr 995 281

Related manuals

Manual 76 pages 40.07 Kb