Miele CM 5000 operating instructions Rinsing the system manually

Page 46

Cleaning and care

Rinsing the system manually

The system will need to be rinsed manually if the machine has been used and the automatic rinsing is turned off.

^Place a suitable container under the coffee dispensers.

^In the main menu, press and hold the OK button for two seconds.

 

SETTINGS

 

<

MAINTENANCE

>

 

 

 

^Turn the rotary selector until MAINTENANCE appears in the display. Confirm with OK.

^Turn the rotary selector until RINSE THE SYSTEM appears in the display. Confirm with OK.

^Turn the rotary selector until START appears in the display. Confirm with OK.

The piping will now be rinsed. The water from the rinsing process will flow from the coffee dispensers.

46

Image 46
Contents Operating Instructions Freestanding coffee machine CM Contents Contents Proper use ChildrenTechnical safety Safety Quick Guide Guide to the machine Display and controls Control Action FunctionAccessories Before the first use Setting the languageFirst steps to use Turning onSetting the time of day Setting the clockWater hardness Level 2 moderate Setting the water hardnessLevel 1 soft Level 3 hardFilling the water tank Filling the coffee bean container Turning the machine On / Off Turning offPre-heating cups Preparing coffee or espresso Preparing two portions at one timeCanceling preparation Adjusting the height of the coffee dispensersMaking coffee or espresso using ground coffee Adding ground coffeePreparing coffee/espresso using ground coffee Frothing and heating milk Preparing the milk flaskPreparing milk froth Preparing hot milk After preparing milkPreparing a cappuccino Milk temperatureMilk froth consistency Preparing a Latte MacchiatoPreparing hot water Adjusting the grinder setting To avoid damaging the grinderAdjusting the strength of the coffee Pre-brewing the coffee To turn the pre-brewing function on or offBrewing temperature To set the coffee/espresso temperatureSetting the serving size Programming the amount using the or buttonsProgramming the amount using the Settings menu Settings Menu How to ActionOption Available settings Options menuLanguage Time of day and clock display Setting the time of dayClock format Setting the timer TimerSwitch on at Switch off at Switch off afterTo activate and deactivate the timer Default settings To select the operating mode Operating modesActivating / Deactivating the system lock System lockTemporarily deactivating the system lock Displaying information How often Necessary cleaning Cleaning and careWash by hand only Dishwasher safe Rinsing the system Turning the automatic rinsing On / OffRinsing the system manually Cappuccinatore Rinsing the cappuccinatoreMilk flask Water tankDrip tray cover Drip tray and waste containerDrip tray Waste containerCleaning the brew unit Coffee bean containerDo not move the brew unit handle Cleaning/Degreasing the brew unit Exterior Avoid the following on all surfacesDescaling Selecting Descale via the Maintenance menu Eco-Mode Energy saving modeTurning off Evaporating the coffee system TransportPacking Fault 1, Fault 80 or Fault Frequently Asked QuestionsFault messages appear in the display FaultOpen the Valve Frequently Asked Questions Espresso or coffee flows into the cup too quickly Preparation / dispensing problemsEspresso or coffee flows too slowly into the cup Coffee or espresso is not hot enough Crema on the coffee or espresso is not rightWater has stopped flowing when programming the amount General problemsThere is a lot of coffee water in the waste container Coffee system turns off suddenly Grinder is louder than usual Grinder control will not moveDescaling program was started accidently Loud noised are heard during the descaling programAfter sales service RepairsInstallation instructions Disposal of packing material Caring for the environmentDisposal of an old appliance Electrical connection Installation Dimensions Page Page Alteration rights reserved Nr 995 281
Related manuals
Manual 76 pages 40.07 Kb