Roberts Radio R9969 Cancelling the alarm for the day, Cancelling alarm stand-by, Sleep timer mode

Page 21
Cancelling the alarm for the day

Cancelling the alarm for the day

1.Press the On/Off Sleep button while the alarm is sounding. The alarm (signal tone or radio) stops, but the alarm function remains

 

activated for the next day at the set time.

 

1

Cancelling alarm stand-by

 

 

1.

Press the appropriate Alarm button (signal tone or radio).

 

 

2.

To deactivate the alarm, press the C Memo Del button.

1

2

Sleep timer mode

The receiver has an adjustable sleep-timer, which can be set to 15, 30, 60, 90 or 120 minutes.

Setting the sleep timer

1.With the radio playing, press and hold down the On/Off Sleep button. The sleep times will flash in sequence 60...30...15...120...90.

1 Cancelling alarm stand-by

2.To set the desired switch-off time, release the On/Off Sleep button.

2 Sleep timer mode

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

21

Image 21
Contents Please read this manual before use PLL Synthesised World RadioR9969 Sound for GenerationsContents CONTROLS Controls - Front Left side Controls Right side20 21 22 23 20.SSB Fine Tuning 21.SSB On/Off 22.Tone low/high 23.VolumeBottom Controls30 30. Reset button 29. AntennaControls Back 33.Battery compartment33 31.Map of world time zones 32.Frequency scale Installing the batteries Setting local time Switching on and setting the clock1.Press the SW Page Clock 1/2 button. The display flashes for local time Setting local timeSetting and storing radio stations Tuning radio stations directly1. Press the Freq./Clock button Tuning radio stations manually Tuning radio stations manuallySaving radio stations at preset positions Storing short wave SW stations2.Press the Memo AM/PM button Automatic station search Deleting preset stationsChecking stored radio stations Calling up stored radio stationsChanging preset positions Adjusting the volumeAdjusting the tone Listening with Headphones Switching between stereo and mono receptionSetting the reception sensitivity Special features of SW reception Connecting the external SW antennaShort wave reception 1.Select the SW waveband using the Band button Alarm with signal tone Alarm mode Displaying the alarm timeAlarm with radio station Cancelling alarm stand-by Cancelling the alarm for the daySleep timer mode Setting the sleep timerAdditional functions Displaying local time 1 or Deactivating the sleep timerCode Setting various function modesFunction CodeSwitching on the back lighting for the display Disabling and enabling the fine tuning dialDisabling and enabling the buttons Deleting all settings Power supply SpecificationsDimensions and weight AntennasGuarantee ROBERTS RADIO TECHNICAL SERVICES 97-99Worton Road Isleworth Middlesex TW7 6EGTechnical Helpline - 020 8758 0338 Mon-Fri