Roberts Radio R9969 manual Specifications, Power supply, Antennas, Sockets, Dimensions and weight

Page 26

Specifications

Power supply
Battery operation	4 x 1.5V LR6 (AA size)
Mains operation	6V (200 mA) mains adapter, DC
Output	300 mW 10% THD
Antennas
Telescopic antenna	FM and SW
Ferrite rod antenna	MW and LW
Sockets
DC socket	Dia. 4.0 mm, 6V (200 mA) centre pin
	negative
Headphone jack	Dia. 3.5 mm stereo, 2 x 32 impedance
SW antenna socket	Dia. 3.5 mm mono

Dimensions and weight

W x H x D	184 mm x 120 mm x 40 mm
Weight	510 g

Frequency bands
FM	87.5 - 108 MHz
MW	520 - 1710 kHz or 522 - 1710 kHz
LW	153 - 283 kHz
SW 1 - 14	120 m	2.3 - 2,495 MHz
	90 m	3.2	- 3.4 MHz
	75 m	3.85 - 4.0 MHz
	60 m	4.75		- 5.06 MHz
	49 m	5.9	- 6.2 MHz
	41 m	7.1	- 7.35 MHz
	31 m	9.4	- 9.99 MHz
	25 m	11.6		- 12.1 MHz
	21 m	13.5		- 13.87 MHz
	19 m	15.1		- 15.8 MHz
	16 m	17.48 - 17.9 MHz
	15 m	18.9		- 19.02 MHz
	13 m	21.45 - 21.75 MHz
	11 m	25.6		- 26.1 MHz

Image 26

Contents R9969 PLL Synthesised World RadioPlease read this manual before use Sound for GenerationsContents CONTROLS Controls - Front 20 21 22 23 20.SSB Fine Tuning 21.SSB On/Off Controls Right sideLeft side 22.Tone low/high 23.Volume30 30. Reset button ControlsBottom 29. Antenna33 31.Map of world time zones 32.Frequency scale Controls Back33.Battery compartment Installing the batteries Switching on and setting the clock Setting local timeSetting local time 1.Press the SW Page Clock 1/2 button. The display flashes for local time1. Press the Freq./Clock button Setting and storing radio stationsTuning radio stations directly Tuning radio stations manually Tuning radio stations manually2.Press the Memo AM/PM button Saving radio stations at preset positionsStoring short wave SW stations Deleting preset stations Automatic station searchCalling up stored radio stations Checking stored radio stationsAdjusting the tone Changing preset positionsAdjusting the volume Setting the reception sensitivity Listening with HeadphonesSwitching between stereo and mono reception Short wave reception Special features of SW receptionConnecting the external SW antenna 1.Select the SW waveband using the Band button Alarm mode Displaying the alarm time Alarm with signal toneAlarm with radio station Sleep timer mode Cancelling the alarm for the dayCancelling alarm stand-by Setting the sleep timerDeactivating the sleep timer Additional functions Displaying local time 1 orFunction Setting various function modesCode CodeDisabling and enabling the buttons Switching on the back lighting for the displayDisabling and enabling the fine tuning dial Deleting all settings Dimensions and weight SpecificationsPower supply AntennasGuarantee Technical Helpline - 020 8758 0338 Mon-Fri ROBERTS RADIO TECHNICAL SERVICES97-99Worton Road Isleworth Middlesex TW7 6EG

Specifications

Power supply

Antennas

Sockets

Dimensions and weight

Frequency bands