Installing the batteries
4 x 1.5V, LR6 (AA size) type batteries are required.
1. Open the battery compartment on the back of your receiver by pressing the marking and opening the lid.
2.Insert the batteries into the compartment. Make sure the (+) and
3.Close the battery compartment cover.
Note: When the batteries are low, the battery level icon flashes in the display. Each time the radio is switched off the battery charge indicator appears for seven seconds. If the charge level falls below 2 the batteries must be changed. If the batteries are not replaced within 3 minutes all stored settings will be lost.
Remove the batteries if the reciever is not going to be used for an extended period of time. The manufacturer accepts no liability for damage resulting from used batteries.
Environmental note: Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner.
1
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
7