Miele 09 741 681 installation instructions Unsatisfactory results

Problem

Possible cause and solution

The consistency of

The milk temperature is too high. Good milk froth can only

the milk froth is

be prepared with cold milk (< 55°F/13°C).

unsatisfactory.

￿ Check the milk temperature in the milk container.

The milk pipework or the air intake hose is clogged.

￿ Follow the instructions in chapter "Cleaning clogged milk

pipework".

The grinding of the

The coffee bean container has run empty during the

coffee beans

grinding process.

sounds louder

￿ Fill the coffee bean container with fresh beans.

than usual.

There might be stones mixed in with the coffee beans.

￿ Turn the coffee system off immediately. Contact Miele

Technical Service.

Espresso or coffee

The grind level is too coarse.

flows into the cup

￿ Set the grinder control to a finer setting (see "Adjusting the

too quickly.

grinder setting").

Espresso or coffee

The grind level is too fine.

flows into the cup

￿ Set the grinder control to a coarser setting (see "Adjusting

too slowly.

the grinder setting").

The coffee or

The cup has not been pre-heated.

espresso is not hot

The brewing temperature is set too low.

enough.

￿ Set a higher brewing temperature (see "Brewing

temperature").

The brew unit filters are blocked.

￿ Remove the brew unit and clean it by hand (see "Brew

unit" ).

￿ Degrease the brew unit (see "Brew unit").