Plumbing
Installing the stainless steel tubing in the unit
Remove the water connection cover at the lower rear side of the coffee machine.
Take the angled side of the stainless steel tube and check whether the sealing ring is in place. If necessary, insert it.
Place the union nut of the stainless steel tube onto the screw thread.
Make sure the fittings are tight.
Connection to the water supply
Disconnect the machine from the electrical supply before connecting it to the water supply.
Remove the water connection cover at the lower rear side of the coffee machine.
Check whether the sealing ring is in place. If necessary, insert it.
Screw the supplied brass compression fitting, with the ¾" end, tightly onto the water connector of the coffee machine. (Tighten the compression fitting by hand, do not use a tool.) The fitting includes an opening for standard ¼" piping.
Connect the compression fitting to the water supply.
Slowly open the
If necessary, check whether the sealing ring and fittings are tight.
You can now continue with the installation of the unit (see "Installation").
81