![](/images/new-backgrounds/1071732/71732151x1.webp)
Cleaning clogged milk pipework
Slide the hoses back onto the angled section and reinsert it.
Reinsert the air intake hose into the opening .
Step 3: Cleaning the milk valve and the milk pipework in the main dispenser
Touch "Main menu" or the "Back" sensor.
Touch "Maintenance" .
Touch "Clean the main dispenser".
The main dispenser and the milk valve will move into the maintenance position.
Important! Before you confirm "Leave maintenance position" with "OK", you must remove the cleaning brush. Otherwise, the coffee system will be damaged.
Insert the brush into the milk valve. Move the brush back and forth.
Remove and disassemble the dispensing unit as described in "Cleaning and care – Main dispenser".
Rinse all parts carefully under running water.
Use the cleaning brush to clean all parts carefully. Do not use a needle or suchlike in order to avoid piercing the silicone parts.
Reassemble the dispensing unit and reinsert it into the main dispenser.
Replace the cover.
Touch "OK".
The milk valve will move into the stan- dard position and the milk pipework is rinsed.
76