Miele KM 452 manual Cooking without auto heat, Proceed as follows

Page 16

Using the cooktop

To turn off auto heat before the heat-up time has finished:

^Set the display to 0.

^Then select the setting you want to continue using by pressing the + touch control.

Cooking without auto heat

Proceed as follows:

^If 0 is showing in the display, keep the + touch control pressed until the

desired power setting shows in the display, e.g. 4:

4q

The same number of segments, q, will show in the light ring, i.e. if setting 4 is selected four segments will light up.

16

Image 16

Contents Operating Instructions Ceramic Cooktop Contents Important Safety Instructions InstallationUse Protection from damage Injury prevention Important Safety Instructions Appliance safety Further safety notesGuide to the cooktop Burner Diameter in inches cm Rating in wattsL k j Touch controlsBurner touch controls Burner displays Timer = Power setting= Fault = Ready for useClean the cooktop Before using for the first timeHeat the cooktop Automatic reset of the touch controls Manual reset of the touch controlsUsing the cooktop Turning on the cooktopTurning on a burner Turn on with + toAuto heat Cooking setting Minutes How to activate auto heatHeat-up time To turn off auto heat before the heat-up time has finished Cooking without auto heatProceed as follows Cooktop settings SettingsTurning on a variable burner Turning on the extended burnerTurning off a burner Residual heat indicatorTurning off the cooktop Cooking surface Selecting cookwarePots and pans Selecting cookware Safety features Safety lockTo activate the safety lock To deactivate the safety lockSafety cut-out feature Power setting Maximum Operating hoursSafety cut-out if the touch controls are covered To reset the touch controlsOverheating protection Timer To set the timerTo set the timer to turn off a burner Cooktop care Frequently asked questions Cooktop Settings Technical Service Alterations rights reserved