Miele KM 452 manual Timer, To set the timer

Page 26

Timer

The cooktop has two timers. They can be used to time any activity in the kitchen or to automatically turn off the front left a and front right f burners.

Each timer can be set from 1 to 99 minutes.

To set the timer

The timer can only be used when the cooktop is turned on, and the burner belonging to the timer is turned off.

^With the cooktop turned on press the - or + touch control for the timer until the desired time appears in the timer display e.g. 15 minutes.

u

The set time counts down in minutes in the time display. It can be changed at any time by pressing the - or + touch controls.

The timer can be turned off before the set time has elapsed by pressing the - and + touch controls simultaneously.

When the set time has elapsed, 00 appears in the timer display for 30 seconds, and a tone sounds for 10 seconds.

If you select a power setting for the burner belonging to the timer you are using, the timer will shut off. The time set goes out and 00 will appear in the display.

26

Image 26
Contents Operating Instructions Ceramic Cooktop Contents Important Safety Instructions InstallationUse Protection from damage Injury prevention Important Safety Instructions Appliance safety Further safety notesGuide to the cooktop Burner Diameter in inches cm Rating in wattsL k j Touch controls= Fault Burner touch controls Burner displays Timer= Power setting = Ready for useHeat the cooktop Before using for the first timeClean the cooktop Automatic reset of the touch controls Manual reset of the touch controlsTurning on a burner Using the cooktopTurning on the cooktop Turn on with + toHeat-up time Cooking setting Minutes How to activate auto heatAuto heat Proceed as follows Cooking without auto heatTo turn off auto heat before the heat-up time has finished Cooktop settings SettingsTurning on a variable burner Turning on the extended burnerTurning off the cooktop Residual heat indicatorTurning off a burner Pots and pans Selecting cookwareCooking surface Selecting cookware To activate the safety lock Safety featuresSafety lock To deactivate the safety lockSafety cut-out feature Power setting Maximum Operating hoursSafety cut-out if the touch controls are covered To reset the touch controlsOverheating protection Timer To set the timerTo set the timer to turn off a burner Cooktop care Frequently asked questions Cooktop Settings Technical Service Alterations rights reserved