Miele KM 452 manual Turning on a variable burner, Turning on the extended burner

Page 18

Using the cooktop

Turning on a variable burner

The second circle of a variable burner can be turned on to extend the cooking area for larger pans.

Proceed as follows:

^Turn on the burner and select a power setting.

^Touch the n control for the outer circle.

A short segment, p, will appear in the top left of the ring to indicate that the extended burner has been turned on.

p

Turning on the extended burner

When using large pots or pans the rear middle left and right burners can be combined to one extended burner. This is only possible if the rear middle left burner is shut off at the beginning.

^Turn on the rear middle right burner and select a power setting.

^Touch the C control of the rear middle right burner.

This will activate the rear middle left burner and the field in between. A short segment, p, will appear in the top left of the ring to indicate that the extended burner has been turned on.

p

To turn the outer circle off, press the n touch control, or set the burner display back to 0. The short segment, p, will then go out.

The extended burner is controlled by the touch controls of the rear middle right burner.

18

Image 18
Contents Operating Instructions Ceramic Cooktop Contents Important Safety Instructions InstallationUse Protection from damage Injury prevention Important Safety Instructions Appliance safety Further safety notesGuide to the cooktop Burner Diameter in inches cm Rating in wattsL k j Touch controls= Fault Burner touch controls Burner displays Timer= Power setting = Ready for useBefore using for the first time Clean the cooktopHeat the cooktop Automatic reset of the touch controls Manual reset of the touch controlsTurning on a burner Using the cooktopTurning on the cooktop Turn on with + toCooking setting Minutes How to activate auto heat Auto heatHeat-up time Cooking without auto heat To turn off auto heat before the heat-up time has finishedProceed as follows Cooktop settings SettingsTurning on a variable burner Turning on the extended burnerResidual heat indicator Turning off a burnerTurning off the cooktop Selecting cookware Cooking surfacePots and pans Selecting cookware To activate the safety lock Safety featuresSafety lock To deactivate the safety lockSafety cut-out feature Power setting Maximum Operating hoursSafety cut-out if the touch controls are covered To reset the touch controlsOverheating protection Timer To set the timerTo set the timer to turn off a burner Cooktop care Frequently asked questions Cooktop Settings Technical Service Alterations rights reserved