Miele H 4042 BM installation instructions m T S, Triangle V in the display, Guide to the display

Guide to the display

Triangle V in the display

When the triangle lights up V below a symbol in the display, the corresponding function is indicated.

If the triangle flashes V below a symbol, the function has been selected and can be changed.

The triangle V flashes for about 5 seconds.

The setting can be changed using V or W only while it is flashing.

If this entry time elapses, you must once again call up the desired symbol with "OK".

325

6m T S V

When one of the touch controls is pressed, depending on the position of the function selector, the symbols of the settings that can be entered light up in the display.

^Press V or W until the triangle V stops underneath the desired symbol.

^Select "OK" to confirm. The triangle V flashes.

Each time V or W is pressed, the following changes are made:

–Time T Microwave (Solo) in 10 -second increments,

–Time T in 1 -minute increments,

–End S in 1 -minute increments,

–Short time N in 5 -second increments, followed by 1-minute increments.

Press and hold the touch controls to quickly move through the display.

12