Miele H 4042 BM installation instructions Changing the light bulb, Frequently asked questions

Frequently asked questions

Changing the light bulb

,To reduce the risk of electric shock, disconnect this appliance from the power supply by shutting off the power main or tripping the circuit breaker.

The bulb cover is comprised of two parts: a glass cover and a frame. Hold the bulb cover firmly so it does not fall. As a precaution, place a dish towel on the floor of the oven and the open door.

^Unscrew the bulb cover with a Torx screwdriver (T20) and remove the cover.

^Pull out the halogen bulb.

Only use the following light bulb: 12 V, 10 W, 572 °F (300 °C) heat resistant, socket G4, type 64418 made by Osram.

Do not touch the new light bulb with your fingers; touching the bulb will reduce its life. Follow the bulb manufacturer’s instructions.

^Insert a new halogen bulb.

^Place the glass cover into the frame and fasten the bulb cover: Insert the tip of the frame into the recess in the oven ceiling. Press the frame into the oven ceiling and tighten the screw.

^Restore power to the appliance

45